Operating Instructions; Power On / Off; Auto Power Off; Auto Hold - Amprobe IR-450 Manual De Uso

OPERATING INSTRUCTIONS

Power On / Off

Auto Power Off

The IR-450 will power down after not being used for 3
minutes.

Auto Hold

The unit will hold the reading for 10 seconds after the
on button is pressed.

Operating the Unit

To measure temperature, point unit at an object and press
the Test button. Be sure to consider distance-to-spot size
ratio and your distance from the measured object. The IR-
450 is equipped with a laser. Use the laser only for aiming.
See "Taking Temperature Measurement".

Taking Temperature Measurement

Target Area
Incorrect
3
GlobalTestSupply
www. .com
Find Quality Products Online at: sales@GlobalTestSupply.com