Using Other External Components; Front Aux; Av-In - JVC KW-AV61BT Manual De Instrucciones

Using other external components

• When the operation buttons are not displayed on the screen, touch the area shown on
the illustration.
• To change settings for video playback, ☞ page 40.
Source type ("AV-IN" or

"Front AUX")

[Mode]* Changes the AV-IN name.
• Press [2] or [3] to select an AV-IN name.
[HOME] Displays the <HOME> screen.
* Appears when "AV-IN" is selected as the source.
Front AUX
1
Connect an external component.
3.5 mm stereo mini plug
(not supplied)
2
Select "Front AUX" as the source.
(☞ page 12)
3
Turn on the connected component and
start playing the source.
AV-IN name* ( ☞ below)
*
33

AV-IN

You can connect external components to the LINE IN/
VIDEO IN jacks. (☞ Installation/Connection Manual)
Preparation:
Select [AV-IN] for <AV Input>. (☞ page 44 )
• <AV Input> can be changed only when <Input>
in <Navigation Input> is set to [RGB] or [Off].
1
Select "AV-IN" as the source.
2
Turn on the connected component and
start playing the source.
(☞ page 12)