Before Using The Appliance; Description Of Buttons - Unold 48880 Instrucciones De Uso

The manufacturer will not be liable in the event of incorrect assembly, improper or incorrect use or if
DE
repairs are carried out by unauthorized third parties.
EN

BEFORE USING THE APPLIANCE

FR
1. Before taking your ice cream maker into operation for the first time, we rec-
ommend to rinse all removable parts – except the compressor casing (4) –
NL
in warm water.
IT 2. Wipe the casing and slot for the ice cream bowl with a damp, well-wrung
cloth.
ES
3. Place the appliance on a dry, level work surface.
4. Due to storage and transport, the lubricant for the mixer drive may become
PL
viscous in individual cases. If the mixer does not rotate automatically dur-
ing operation or after a longer break, please press the mixer firmly into the
ice container and turn it clockwise by hand a few times. A smooth opera-
tion is usually possible then. Otherwise, please contact our customer ser-
vice department.

DESCRIPTION OF BUTTONS

Menu
Start/
Power
Break
(On/OFF)
if you press the button for approx. 3 seconds, the appliance will return to the
original settings.
Rotary knob (for time adjustment)
Turn the knob to select the desired time. If you turn the knob to the left (coun-
ter-clockwise), the time will be shortened in 1-minute increments, if you turn the
knob to the right the time will be extended in 1-minute increments. The mini-
mum preparation time is 5 minutes, shorter times cannot be set.
28 von 112
Copyright UNOLD AG | www.unold.de
Button "Power"
When the plug is in the power socket, the appli-
ance is in the stand-by-mode. The display shows
"00". Press the button in order to turn on the ap-
pliance. The display lights up and shows "60:00".
In order to turn off the appliance during operation,
press this button as well.
Button "Menu"
With this button, you choose between the three
preparation programmes "Mix & Freeze", "Freeze"
Rotary
knob
or only "Mix". When the appliance is in operation,
Stand 29.7.2020