Kenmore BC4027 Manual De Uso Y Cuidado página 24

PROBLEM
CHECK BAG Indicator
activates.
Vacuum cleaner picks
up moveable rugs -or-
PowerMate ® pushes too
hard.
Cord won't rewind.
Vacuum cleaner leaves
marks on carpet.
POSSIBLE CAUSE
1. Full or clogged dust bag.
2. Dirty filters.
3. Blocked airflow passage.
4. Certain attachment tools.
1. Wrong pile height setting.
2. Suction too strong.
1. Dirty power cord.
2. Cord jammed.
1. Wrong vacuuming pattern.
POSSIBLE SOLUTION
1. Change bag.
2. Clean/change filters.
3. Clear blockage from airflow
passage.
4. This is normal. Light should go off
when tool is removed.
1. Adjust setting.
2. Select lower Power Level.
1. Clean the power cord.
2. Pull out cord and rewind.
1. See VACUUMING TIPS. (page 12)
- 24 -