Store Weight Value (Hold); Body-Mass-Index (Bmi) - Seca 656 Manual De Instrucciones

Store weight value (HOLD)

You can also continue displaying the weight determined once the load has been removed.
This makes it possible to look after a patient first, before having to note the weight:
– Press the HOLD/TARE key whilst the
load is on the scale.
"HOLD" appears in the digital display.
The value is stored until the HOLD func-
tion switches off automatically.
– The HOLD function can be switched off
by pressing the HOLD key again.
appears in the display if the scale
0. 0
has no load on it, otherwise the current
weight. The "HOLD" display vanishes.
Note:
The HOLD and TARE functions can also be used simultaneously.

Body-Mass-Index (BMI)

Body Mass Index puts height and weight in relationship to one another, providing more
accurate information than ideal Broca weight, for example. A tolerance range is given
which is considered ideal for health.
– Press the Start key with no load on the
scale.
,
se(a 8. 8 . 8 . 8 . 8 .
secutively in the display. The scale is
then automatically set to zero and ready
for operation.
– Press the FUNC key.
The last function used appears in the
display.
– Use the arrow keys to select the BMI
function, FU 1. Activate the function by
pressing the FUNC key again.
The last memory used appears in the
display.
An arrow on the left-hand side of the
display also indicates which memory is
set.
– Use the arrow keys to select the memo-
ry position under which you wish to re-
cord – or under which you have already
recorded – the patient's height.
– Press the FUNC key again. The pati-
ent's recorded height will then appear
on the display.
22
and appear con-
0. 0