Toto CST446 Manual De Instrucciones página 5

5. Install the side screws to the
mounting blocks. Cover the
screw head with the provided
screw caps (ill. 4).
6. Install the tank-to-bowl mounting
hardware to the tank (ill. 5).
Do NOT overtighten
⚠CAUTION
hardware, as it may break
the china and cause
personal injury or property
damage.
7. Place the tank upside down onto
some padding. Inspect the smaller
fill valve nut and larger flush valve nut
for a secure connection (ill. 6). Try to
tighten the nuts with your hands. If
loose, tighten the nut hand tight and
an additional 1/4 turn for the smaller
fill valve nut and an additional 1/2
turn for the larger flush tower nut.
Make sure that the fill
NOTICE
valve does not turn
and hit the tank while
tightening.
8. Connect the water supply hose (not
provided) to the fill valve (ill. 5).
The water supply hose
NOTICE
must be connected to
the fill valve BEFORE the
tank-to-bowl installation.
TOTO recommends
using a longer flexible
supply hose.
9. Place the tank-to-bowl gasket onto
the flush tower nut (ill. 7). While
pressing down, spread the gasket
over the nut until the gasket touches
the bottom of the tank. A slight gap
between the tank bottom and the
gasket is allowable.
INSTALLATION PROCEDURE
ill. 4
Cap
Side-screw
ill. 5
ill. 6
Fill valve nut
5
Cap
Side-screw
Bolt
Rubber washer
Metal washer
Nut
Flush valve nut