Technical Data; Pneumatic Requirements; Safety Warnings For The Use Of - Truper PIPI-410 Manual Instructivo

Technical Data
Pneumatic Requirements
Safety Warnings for the Use of
Pneumatic Tools

Safety Warnings for the Use of

Spray Guns
Parts
Preparation
Start Up
Maintenance
Troubleshooting
Notes
Description
Jar Capacity
Air Pressure
Connection Diameter
Air Consumption
Nozzle Diameter
• For household jobs, it is possible to use 1,5 CV compressors with a 25 liters' deposit. For more demanding jobs, like
bodywork, industry, etc., we recommend using 3 CV compressors with a 100-liter deposit as minimum.
• Use high-pressure hoses with the adequate length to do the job comfortably.
• Dust and water condensation inside the compressor tank can cause a deficient finish in the surface to be
CAUTION
painted. To prevent that possibility, install a regulating filter between the compressor and the gun.
2
ENGLISH
2
2
3
4
5
6
7
8
9
10
Code

Pneumatic Requirements

Pressure hose
Contents
CAUTION
To gain the best performance of
the tool, prolong the duty life,
make the Warranty valid if
necessary, and to avoid hazards
of fatal injuries please read and
understand this Manual before
using the tool.
Keep this manual for future references.
The illustrations in this manual are for reference
only. They might be different from the real tool.

Technical Data

PIPI-410
11097
Mini Gravity Feed Touch-up Spray Gun
4 oz
30 PSI - 50 PSI
1/4 NPT
2.5 CFM
0.03"
Regulating
filter
Air
compressor