Technical Data; Pneumatic Requirements - Truper TAN-PI10 Manual Del Usuario

Technical Data

Paint Hose Input Connection
Paint Hose Internal Diameter
CAUTION
An increase in the hose line pressure or the internal diameter shall be considered to compensate the use
of very long hoses (more than 26 ft). The minimum internal diameter of the hose shall be 3/8" and the connector shall be
1/4 NPT. Use good quality couplings and accessories having the right size.

Pneumatic Requirements

CAUTION We recommend using at the least 3 CV compressors with a 100-liter deposit.
• Use high-pressure hoses with the right length to easily carry out the paint job.
Air
Compressor
Description
Work Pressure
Maximum Pressure
Tank Capacity
Air Inlet Connection
Air Hose Internal Diameter
Code
45 PSI (310,2 kPa)
60 PSI (413,6 kPa)
Hose
TAN-PI10
16908
Paint Tank
10 Liters
3/8 NPT
1/4"
1/4 NPT
1/4"
Air
ENGLISH
Paint Hose
3