Risk of injury
MAB 100
WARNING
Improper handling of the machine increases the risk of
injury!
Observe the following safety precautions to avoid injuring your-
self and/or others:
►
Operate the machine only with the protective equipment
stipulated in these operating instructions (see section Per-
sonal protective equipment).
►
Do not wear protective gloves when the machine is running.
A glove can be caught by the drilling machine and torn off
the hand. Risk of losing one or more fingers.
►
Remove loose jewellery before beginning work. Wear a hair
net if you have long hair.
►
Always switch off the machine before changing tools, per-
forming maintenance or cleaning. Wait until the machine has
come to a complete standstill.
►
Always remove the plug from the mains socket before
changing tools, cleaning or performing maintenance, in
order to avoid unintentional starting of the machine.
►
Do not put your hand into the machine while it is in opera-
tion. Remove shavings only when the machine is at a stand-
still. Wear protective gloves when removing swarf.
►
When working on scaffolding, the operator must be secured
with a safety belt as the machine can oscillate dangerously
in the event of interruption to the power supply.
►
Check for secure clamping of the electromagnets on the
substrate before every use (see section Preparing).
►
Secure the machine with the safety chain supplied when
working from an inclined or vertical position or during over-
head work. The machine could fall down if the magnet is
loosened or the power fails.
►
Check that the tool is tightened securely before using (see
section Inserting the tool).
►
Do not allow the connecting cable to hang over edges (dan-
ger of tripping).
Safety
33