Max SN890CH/34 Manual De Operaciones Y Mantenimiento página 13

Adjustment dial
Deeper Shallow
Contact arm "B"
Contact tip
Contact tip Tail hanger
Trigger lock dial
Trigger
DRIVING DEPTH ADJUSTMENT
WARNING:
ALWAYS disconnect air supply before making adjustment.
The driving depth adjustment is made by adjusting the contact arm "B".
q With air pressure set, drive a few nails into a representative material sample to
determine if adjustment is necessary.
w If adjustment is required, disconnect air supply.
e Refer to the mark on the contact arm for direction to turn the adjustment dial.
r Re-connect air supply.
CONTACT TIP (OPTION)
WARNING:
ALWAYS disconnect air supply before attaching / detaching the contact tip.
Attach the contact tip on the tip of contact arm "B", when driving nails to a soft material.
The contact tip can be kept at the tail hanger when not using.
DIRECTIONAL EXHAUST COVER
WARNING:
ALWAYS disconnect air supply before rotating the exhaust cover.
Direction of the exhaust air is changeable by rotating exhaust cover by hand.
TRIGGER LOCK MECHANISM
The tool is equipped with a trigger lock mechanism. Push and rotate the trigger LOCK
to the trigger UNLOCK position before driving nails.
13