Assembly; Fitting The Loop Handle; Assembling The Guard - Husqvarna 536LiLX Manual De Instrucciones

Fitting the loop handle

Li-ion Li-ion
• Clip the loop handle onto the shaft. Note that the loop
handle must be fitted between the arrows on the shaft.
• Slide the spacer into the slot in the loop handle.
• Fit the nut, knob and screw. Do not overtighten.
• Now adjust the trimmer to give a comfortable working
position. Tighten the bolt/knob.

Assembling the guard.

Li-ion Li-ion
• Fit the correct trimmer guard (A) for use with the
trimmer head.
2
1
• Hang the trimmer guard on the hook on the plate
holder (1). Bend the guard around the shaft and
tighten it with the bolt (2) on the opposite side of the
shaft.

ASSEMBLY

A
–
English 13