Assembly - Ryobi RY40502 Manual Del Operador

KNOW YOUR CHAIN SAW
See Figure 4.
The safe use of this product requires an
understanding of the information on the tool and
in this operator's manual as well as a knowledge
of the project you are attempting. Before use of
this product, familiarize yourself with all operating
features and safety rules.
CHAIN TENSIONING SCREW
This feature allows user to adjust the tension of
the chain.
GUIDE BAR
The factory-equipped guide bar has a small radius
tip that offers a somewhat lower kickback potential.
LOCK-OUT BUTTON
A control feature designed to prevent the motor
from being accidently started.
UNPACKING
This product has been shipped completely
assembled.
 Carefully remove the product and any
accessories from the box. Make sure that all
items listed in the packing list are included.
WARNING:
Do not use this product if any parts on the
Packing List are already assembled to your
product when you unpack it. Parts on this
list are not assembled to the product by the
manufacturer and require customer installation.
Use of a product that may have been improperly
assembled could result in serious personal
injury.
FEATURES
LOW KICKBACK CHAIN
The low kickback chain helps minimize the force
of a kickback reaction by preventing the cutters
from digging in too deeply at the kickback zone.
QUICK VIEW OIL INDICATOR
Semi-transparent oil reservoir that allows user to
see when to add oil.
SWITCH TRIGGER
Squeeze the switch trigger to operate the unit after
switch lock-out has been pushed in. Release the
switch trigger to stop the unit.

ASSEMBLY

 Inspect the product carefully to make sure no
breakage or damage occurred during shipping.
 Do not discard the packing material until you
have carefully inspected and satisfactorily
operated the product.
 If any parts are damaged or missing, please call
1-800-860-4050 for assistance.
PACKING LIST
Chain Saw with Scabbard
Combination Wrench
Operator's Manual
13 - English