Bar And Chain Combinations; Troubleshooting - Ryobi RY40502 Manual Del Operador

Chain specifications: 3/8 in. pitch, low profile narrow kerf, .043 in. chain gauge, 6-tooth drive sprocket.
Length of Bar
14 in.
PROBLEM
Bar and chain running
hot and smoking.
Motor runs, but chain is
not rotating.

BAR AND CHAIN COMBINATIONS

Guide Bar Part Number
681859001

TROUBLESHOOTING

CAUSE
1. Check chain tension for
over tight condition.
2. Chain oil tank empty.
1. Chain tension too tight.
2. Check guide bar and chain
assembly.
3. Check guide bar and chain
for damage.
For any questions about operating or maintaining your product,
Your product has been fully tested prior to shipment to ensure
Chain Part Number
1. Tension chain. Refer to Chain
2. Check oil tank.
1. Retension chain, Refer to Chain
2. Refer to Assembling the Bar and
3. Inspect guide bar and chain for
CALL US FIRST
call the Ryobi
®
your complete satisfaction.
30 - English
681858001
SOLUTION
Tension earlier in this manual.
Tension earlier in this manual.
Chain earlier in this manual.
damage.
Help Line!
Drive Links
52