Optional Accessories; Using With The Wall-Mount Bracket/Speaker System - Sony Bravia KLV-40ZX1M Manual De Instrucciones

Optional Accessories

This unit is designed for use with the following optional accessories, such as the Wall-Mount Bracket (as
of October 2008).
Sufficient expertise is required for installing such optional accessories. Be sure to subcontract the
installation to licensed contractors. Read the instruction manual supplied with the accessories together
with this manual for secure installation.

Using with the Wall-Mount Bracket/Speaker System

Wall-Mount Bracket:
SU-WL700
Speaker System:
SS-WAL700
Sound does not output from the LCD Monitor when the supplied Table-Top Stand is removed to use the LCD Monitor
with the Wall-Mount Bracket. In this case, use the LCD Monitor with the exclusive Speaker System (optional) to
output sound.
Installing With the Unit.
The following steps must be performed to correspond with the installation steps in the instruction manual
of the optional accessories. Follow the instructions in this manual referring to the instruction manual
supplied with the accessories. For explanations referred to in ( ) in the installation steps, see the same steps
in the instruction manual supplied with the accessories.
For Speaker System users, first see the instruction
manual of Wall-Mount Bracket.
1
Make sure that the Table-Top Stand is
removed (if necessary) (4-1).
• The stand is not attached to the LCD Monitor
when unpacking. Place the unit face down.
• If the Table-Top Stand has already been attached,
remove the stand (see page 6).
22
US
Use the accessories supplied with this unit when
installing.
Spacers (black) (4)
2
Place spacers (4-2).
1 Remove four screws
from the rear of the
LCD Monitor.
2 Place spacers
(black - supplied with
your LCD Monitor).
3 Follow steps 4-3 to 4-4 referring to the
instruction manual supplied with the Wall-
Mount Bracket.
When using only the Wall-Mount Bracket
Go to step 6 in this manual.
When using the Speaker System
Go to step 4 in this manual.