Playing tracks in random
order
— Shuffle Play
You can select:
•SHUF 1 to play the tracks on the current disc
in random order.
•SHUF 2 to play all the discs in random order.
Press (SHUF/REP) repeatedly until the
desired setting appears (SHUF 1 or
SHUF 2).
After five seconds, the shuffle play starts.
Each time you press (SHUF/REP), the
display changes as follows:
B SHUF 1
B SHUF 2
Cancel (SHUF off) b
To go back to the normal playback mode, press
(SHUF/REP) repeatedly until "SHUF" or
"REP" disappears.
Playing tracks repeatedly
— Repeat Play
You can select:
•REP 1 to repeat the track.
•REP 2 to repeat the disc.
Press (SHUF/REP) repeatedly until the
desired setting appears (REP 1 or REP 2).
After five seconds, the repeat play starts.
Each time you press (SHUF/REP), the
display changes as follows:
B SHUF 1
B SHUF 2
Cancel (REP off) b
To go back to the normal playback mode, press
(SHUF/REP) repeatedly until "REP" or
"SHUF" disappears.
B REP 1
B REP 2
B REP 1
B REP 2
Changing the output level
You can select the output level from the unit.
Normally the unit is used in the initial output
level; change the level if necessary.
1
Press (SHUF/REP) for two seconds.
2
Press (SHUF/REP) momentarily.
3
Press
or
select the output level.
To decrease the output level
:
,
To increase the output level
:
,
4
Press (SHUF/REP) for two seconds.
Note
When you select level 4 or 5, the CD playback
sound may be distorted or you may hear some
noise. In such a case, select a lower output level on
the unit and turn down the overall volume on
your car audio.
Initial setting
repeatedly to
7