Wire Cup Brush Assembly; Wire Wheel Assembly - Bosch GWX18V-50PC Instrucciones De Funcionamiento

▶ Wire Cup Brush Assembly

A type 27 wheel guard
may not be used for all
tool operations. Do not discard guard
when not in use. Always reinstall wheel
guard when converting back to grinding
operations. When using Wire Cup Wheels,
tool may be used without a guard.
Wear protective gloves
when
brush accessories. Handling of wire brush
accessories without gloves may result in
personal injury.
▼ To install wire cup brush (Fig. 14)
Follow instructions for Mounting and Re-
moving X-Lock Accessories starting on
page 15.

▶ Wire Wheel Assembly

▼ To install wire wheel (Fig. 15)
1. Inspect and adjust Type 27 Grinding
Guard to the proper position, as shown
in figure 6 on page 14.
2. Follow instructions for "Mounting ac-
cessory to the tool" and "Removing the
accessories on page 15.
160992A4FH 05-19 GWX18V-50PC.indd 20
Assembly
Fig. 14
handling wire
Wire Cup
-20-
Brush
Hand
Shield
Fig. 15
Type 27
Wheel Guard
Wire Wheel
6/3/19 7:29 AM