Wire Wheel Assembly - Bosch GWX18V-8 Instrucciones De Funcionamiento Y Seguridad

160992A61E 08-21 GWX18V8.qxp_GWX 9/1/21 8:29 AM Page 20
Wire Cup Brush Assembly
tool operations. Do not discard guard when
not in use. Always reinstall wheel guard
when converting
operations. When using Wire Cup Wheels,
tool may be used without a guard.
brush accessories. Handling of wire brush
accessories without gloves may result in
personal injury.
TO INSTALL WIRE CUP BRUSH (FIG. 14)
Follow instructions for Mounting and
Removing X-Lock Accessories starting on
page 16.

Wire Wheel Assembly

TO INSTALL WIRE WHEEL (FIG. 15)
Inspect and adjust Type 27 Grinding Guard
to the proper position, as shown in figure 6
on page 15.
Follow instructions for "Mounting accessory
to the tool" and "Removing the accessories
on page 16.
Assembly
A type 27 wheel guard
may not be used for all
back to grinding
Wear protective gloves
when handling wire
Fig. 14
Wire Cup
Brush
Fig. 15
-20-
Hand Guard
(sold separately)
Type 27
Wheel Guard
Wire Wheel