Inserting And Releasing; Battery Pack; Operating Instructions; Paddle Switch (Fig. 17) - Bosch GWX18V-50PC Instrucciones De Funcionamiento

▶ Inserting and Releasing

Battery Pack

To insert the battery pack slide it into the
housing until the battery pack locks into
position.
Your tool is equipped with a secondary
locking latch to prevent the battery pack
from completely falling out of the handle,
should it become loose due to vibration.
To remove the battery pack, press the bat-
tery pack release button and slide the bat-
tery pack forward (Fig. 16).
Press the battery pack release button
again and slide the battery pack complete-
ly out of tool housing.

▶ Paddle Switch (Fig. 17)

The paddle switch has a Lock-OFF feature
to help prevent accidental startups.
TO TURN TOOL "ON", push Lock-Off switch
backward to unlock the paddle switch,
then squeeze paddle switch.
TO TURN TOOL "OFF", release pressure on
paddle switch. The switch is spring loaded
and will return to the "OFF" position auto-
matically.
160992A4FH 05-19 GWX18V-50PC.indd 21
page heading Assembly
Fig. 16

Operating Instructions

Fig. 17
-21-
Paddle Switch
6/3/19 7:29 AM