Sony Wega KE-P37XS1 Manual De Instrucciones página 16

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

5
A diagram appears showing you how to connect a wide range of
equipment to your TV set. Follow the instructions and press the
OK button to remove the picture and continue the automatic
process.
6
The Auto Tuning menu appears on the screen. Press the OK
button to select Yes.
7
The TV starts to automatically search and store all
available broadcast channels for you.
8
After all available channels are captured and stored,
the Programme Sorting menu automatically appears
on the screen enabling you to change the order in
which the channels are stored.
a)
b)
9
Press the MENU button to remove the menu from the screen
Your TV set is now ready for use
16
First Time Operation
The connection diagram should be used as a guide only as
most equipment can be connected to more than one type of
TV socket. Once the TV has completed the automatic
tuning process, refer to the 'Connection Guide' section on
page 23 for further information on getting the best set up for
your equipment.
This procedure could take some minutes. Please be patient
and do not press any buttons, otherwise automatic tuning
will not be completed.
In some countries the TV Broadcaster installs the channels
automatically (ACI system). In this case, the TV
Broadcaster sends a menu in which you can select your city
v
V
by pressing the
or
channels.
If no channels were found during the auto tune process, a
message appears automatically on the screen asking you to
connect the aerial. Check the aerial connection (refer to
page 14). Press the OK button to restart the auto tuning
process.
If you wish to keep the broadcast channels in the tuned order,
go to step 9.
If you wish to store the channels in a different order:
v
V
Press the
or
button to select the programme
1
number with the channel (TV Broadcast) you wish
b
to move. Press the
button.
v
V
2
Press the
or
button to select the new
programme number position for your selected
channel (TV Broadcast). Press the OK button to store.
Repeat steps b)1 and b)2 if you wish to change
3
the order of the other channels.
button and OK to store the
Please connect your equipment
according to this chart
DVD
OK
Do you want to start
automatic tuning?
Yes
No
Auto Tuning
Programmes found:
4
No channel found.
Please connect aerial
Confirm
Programme Sorting
01
TVE
02
TVE2
03
TV3
04
C33
05
C27
06
C58
07
S02
08
S06
Programme Sorting
01
TVE
02
TVE2
03
TV3
04
C33
01
TVE
05
C27
06
C58
07
S02
08
S06

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Wega ke-p42xs1

Tabla de contenido