Sony Wega KE-P37XS1 Manual De Instrucciones página 39

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Connecting a DVD or DVD recorder
Connect the DVD or the DVD recorder to the Scart connector
Connecting a DVD recorder with 576p signal format
Some DVD recorder may have 576p signal format. In this case, connect the DVD recorder to the Scart connector
J, to the audio input jacks
2/
Using this connection, the TV will record from the AV2 input ( Scart connector
To watch the input signal, you can chose from AV2 (Scart connector
4 G and video component jacks
Connecting Audio Equipment to the TV
To listen to the sound from TV on Hi-fi equipment.
Connect your audio equipment to the audio output sockets E if you wish to amplify the audio output from the TV.
Next, using the menu system, select the "Sound Adjustment" menu and set the "TV Speakers" to "Off" (see page 21).
• To control the external speakers using this remote control, set "Audio Output" option to "Variable" in
the "Sound Adjustment" menu (see page 21).
• The volume of the external speakers can be altered by pressing the volume buttons on the TV remote control.
The treble and bass setting can also be altered through the "Sound Adjustment" menu (see page 20).
For a sub woofer
Connect your sub woofer to the 5 W/G/W/G output jack D using a monaural audio cable.
To enjoy "Dolby Virtual" sound effect through your
audio equipment
Place the speakers of your equipment in front of your listening position and
beside the TV set.
Then by using the menu system, select the menu "Sound Adjustment". Next
set the option "Audio Output" to "Variable" and the option "Sound Effect" to
"Dolby Virtual" (see pages 20 and 21).
To control the volume level of an external amplifier
When you connect the AV mouse and install it in an external amplifier, you can use the external amplifier's remote
control toward the TV for controlling the volume level of the external amplifier. Connect the AV mouse to the AV
MOUSE IN jack F, and install it right above the external amplifier's remote control sensor.
AV mouse
(supplied)
Amplifier
Remote control sensor
2/
4 G and to the video component jacks Y, P
4 H). To watch the best picture we recommend you select AV4.
J.
/C
, P
/C
B
B
R
R
2/
J).
2/
J) or AV4 (audio input jacks
Hi-Fi speakers
~50°
Your sitting position
Additional Information
4 H.
GB
continued...
39

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Wega ke-p42xs1

Tabla de contenido