Faber Nova PRO Instrucciones De Instalación página 16

20
ELECTRICAL INSTALLATION WITH CONNECTION
3
GROUNDING INSTRUCTIONS This appliance must
be grounded. In the event of an electrical short circuit,
grounding reduces the risk of electric shock by providing
an escape wire for the electric current. This appliance
is equipped with a cord having a grounding wire with a
grounding plug. The plug must be plugged into an outlet
B
that is properly installed and grounded.
WARNING - Improper grounding can result in a risk of
electric shock.
Consult a qualified electrician if the grounding instructions
are not completely understood, or if doubt exists as to
whether the appliance is properly grounded.
Do not use an extension cord. If the power supply cord
is too short, have a qualified electrician install an outlet
near the appliance.
ELECTRICAL INSTALLATION WITH
OPTIONAL WIRING BOX
For Permanent wiring Installation-Use only
with Listed rangehood Wiring Box kit
sku # WIREBOX, manufactured by Faber.
21
For Non-Ducted Recirculation
Attach each
charcoal
filter to the
black grid on
each side of
the blower.
Press the
charcoal
filter tightly
to the black
grid on the blower side and rotate the filter
clockwise (towards the front of the hood) until it
locks into place. Turn counterclockwise (towards
the back of the hood) to remove.
Required Activated Charcoal Filter
Accessory - sku # - FILTER1
(purchased separately)
16
CABLE
5
Option
L
Direct Connect Wiring Box
Accessory sku # WIREBOX
(purchased separately)
22
W
Replace the metal grease filters
removed previously.
Y
Max. 33 "
7/16
4
N