jbc PHS-KB Manual Del Usuario página 5

Changing PCBs of the same batch
The support lets you place PCBs of the same batch so as to always heat the same area.
Use the sliding guides to change the PCBs.
Removing the PCB
After loosening the SP guide knobs, push the
PCB against the SP guide and lift out.
Reworking large PCBs
w w w.jbctools.com
Placing another PCB
Push the PCB against the SP guide, position it
and tighten the SP guide knobs.
Place large PCBs on
the 4 rubber cups
5