Initial Setup - CEMO 95 l Manual De Instrucciones

GB

4. Initial setup

1. Affix the stickers enclosed with the tank doc-
uments permanently to the front panels.
2. Fasten both hose holders to tank
using screws (M6 x 10).
18
3. Installing the delivery hose
Slide the anti-kink spring
over the end of the hose
Hazard label
Only remove the plastic holding clip (blue plastic
part) when the spring clip is in its final position!
Push the spring clip over the anti-kink spring.
UN 1203
Push the hose onto the pump outlet opening.
(for petrol)
Remove the plastic holding clip from the
spring clip.
Wind up earth cable and clamp terminal clamp
to hose holder.
Screw the delivery nozzle to the hose sleeve.
Wind up hose.
Insert the delivery nozzle into the integrated
holder and secure with the sliding bolt lock.
Important
RISK OF INJURY
when using the spring clip