Initial Setup; Operation; Storage; Moving The Petrol Trolley - CEMO 10507 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

4. Initial setup

1. Remove the transport tie-down (red tie-wrap)
of the delivery nozzle.
Place the delivery nozzle in the delivery nozzle
holder and close the delivery nozzle lock.
2. Permanently affix the "Hazard label with
UN1203" from the supplied tank documen-
tation on the front side.
3. Place petrol trolley in a horizontal position.
Before opening the filling lock a , make a
conductive connection with the earth cable h
between the tank and the transport vehicle
or the ground.
Open screw cap a .
Filling the tank.
i
Important!
Avoid sources of ignition, such as
smoking or naked flame.
Warning: Risk of explosion.
Please always use an automatic
delivery nozzle to avoid overflows.
Hold the delivery nozzle in the filling
opening. Do not use an extension.
4. Perform a test filling as described in section
5.6, but hold the delivery nozzle in the still
open filling opening.
5. Close the filling opening with the screw cap.
Disconnect earth cable h from the transport
vehicle or from the ground, wind it up and fix the
terminal clamp to the point provided.
The filling station is now ready for operation.

5. Operation

5.1 Storage

• do not expose the high-grade plastic tank
Hazard label
with UN 1203
Suitable storage conditions:
• ambient temperature: -10 °C to +40 °C
• floor: level and smooth
• ensure adequate ventilation when storing the

5.2 Moving the petrol trolley

Note that considerable downhill forces arise on
steep slopes.

5.3 Loading

The empty petrol trolley can be loaded using the
grip recesses k in the area of the wheels and
the transport handle.
Note that the equipment weighs 16 kg when
empty.
Important!
Material damage (deformation) of
the tank from excessive heating or
mechanical overload.
to direct sunlight for extended periods either
during transport on the vehicle or when
in storage.
(cover when storing outdoors)
(without pointed projections)
petrol trolley inside buildings
i
Important!
The completely filled petrol trolley
is heavy.
i
Important!
The completely filled petrol trolley is
heavy – do not try to lift it on your own.
GB
17

Publicidad

Tabla de contenido
loading

Tabla de contenido