Cleaning And Maintenance; Ec Declaration Of Conformity - Bresser MyTime Thermo/Hygro Quartz Instrucciones De Uso

ClEAnInG AnD mAInTEnAnCE

Before cleaning the device, disconnect it from the
power supply (remove batteries)!
Only use a dry cloth to clean the exterior of the de-
vice. To avoid damaging the electronics, do not use
any cleaning fluid.
Protect the device from dust and moisture. The
batteries should be removed from the unit if it has
not been used for a long time.
DISPOSAl
Dispose of the packaging materials properly,
according to their type, such as paper or card-
board. Contact your local waste-disposal service
or environmental authority for information on the
proper disposal.
Do not dispose of electronic devices in the
household garbage!
As per Directive 2002/96/EC of the European Par-
6
liament on waste electrical and electronic equip-
ment and its adaptation into German law, used
electronic devices must be collected separately
and recycled in an environmentally friendly man-
ner.
The integrated battery must only be removed
for disposal. Opening the device housing can
damage the unit.
Drain the battery completely before disposal. Re-
move all the screws in the housing and open the
device housing. Remove the connections to the
battery and remove it. Cover the open contacts
with tape and package the battery in such a way
that it cannot shift in the packaging.

EC DEClARATIOn OF COnFORmITy

Bresser GmbH has issued a „Declaration of
Conformity" in accordance with applicable
guidelines and corresponding standards. This can
be viewed any time upon request.