Weather Forecast - TFA SIGMA Instrucciones De Uso

TFA No. 35.1062 Anleitung
SIGMA
– Wireless weather station
Time zone setting:
• The time zone is used for the countries where the DCF sig-
nal can be received but the time zone is different from
the German time (e.g. + 1=one hour later). Adjust the
time zone in intervals of 30 minutes.
4.2 Alarm Clock Function
• Select your desired alarm time by the ALARM ON/OFF
button:
1. W = Weekday Alarm (only on weekdays)
2. S = Single Alarm (once)
3. PRE-AL = will be activated if outdoor temperature
is under or equal zero degree
• Set the alarm time in the desired alarm mode. Hold
ALARM ON/OFF button for 2 seconds. The hour digits are
flashing. Press ▲ or ▼ button to adjust the time. Confirm
with ALARM ON/OFF button. Set minutes in the same way.
In PRE-ALM mode you can choose to be awaken 15, 30,
45, 60 or 90 minutes earlier.
• To deactivate the respective alarm function press ▼ but-
ton. OFF appears on the display. To activate press ▲ but-
ton. The corresponding icon appears or disappears on the
display.
• Once the alarm starts to ring, you can activate the snooze
function by pressing the top button SNOOZE. The alarm
will be interrupted for 8 minutes.
• If you leave the alarm sound on for 2 minutes, it will enter
snooze mode automatically with maximum 3 times.
4.3 Display of date
Each press on the MODE button will change the display bet-
ween:
• Clock with hour, minutes and seconds
• Clock with hour, minutes and day of week
• Zone time with hour, minutes and day of week
• Zone time with hour, minutes and seconds
• Day and month
14
25.09.2009 13:55 Uhr Seite 8
SIGMA
– Wireless weather station
4.4 Thermometer
4.4.1 Display change
• Press CHANNEL button to change between the outdoor
transmitters CH1, 2 or 3.
4.4.2 Trend pointers
• The trend pointers displayed on the LCD indicate if the
trend of temperature is increasing, steady or decreasing.
4.4.3 Maximum / Minimum function
• Press MEM button to show the minimum (MIN) values of
temperature of indoor and outdoor transmitters. Press
MEM button again to show the maximum (MAX) values.
• Hold MEM button for 2 seconds to clear the recorded
maximum and minimum reading.

4.5 Weather forecast

• There are 5 different weather symbols (sunny, slightly
cloudy, cloudy, rainy, heavy rain) and 3 different symbols
for the trend of atmospheric pressure (increasing, steady,
decreasing).
• The weather forecast relates to a range of 12 to 24 hours
and indicates only a general weather trend. The accuracy
is about 70 %.
4.6 Outdoor thermo sensor
• By pressing the pick hole on the thermo sensor unit with a
pointed object the temperature unit on the sensor display
can be changed from °C to °F.
• Press RESET to re-start in case of problems.
• After successful installation screw up the battery compart-
ment of transmitter carefully.
• For having additional external transmitters (maximum 3),
proceed as described in chapter 3. Select for each sensor a
different channel by the CHANNEL button before insert-
ing batteries.
15