Lower Anchor Installation; Lower Anchor Removal & Head Support - Diono cambria 2 Manual De Instrucciones

LOWER ANCHOR INSTALLATION

WARNING! Unsecured objects can become flying hazards and can cause
serious injury in an accident. If your vehicle is equipped with lower
anchors, Diono always recommends installation utilizing the LATCH
connectors with this booster seat.
To improve safety and performance, this booster seat is equipped with a
lower anchorage system that allows secure attachment
to a vehicle's lower anchor locations.
1. Disengage LATCH connectors from storage slots and
lay booster seat on its side. While depressing the cam
lock lever, pull LATCH connectors away from the booster
seat and extend both straps all the way.
2. Attach both LATCH connectors to the vehicle
anchors, starting with the connector that is furthest
from you. For ease of use, make sure open end of
hooks face upward during use.
3. While pushing booster against vehicle seat, pull
one adjuster strap tight and then the other. Make
sure that both LATCH connectors are securely
attached to the vehicles lower anchors.
NOTE: Even with LATCH connectors properly attached
and adjusted, child seat will still have movement against
the vehicle seat back and bottom.
14
1-855-463-4666
DISENGAGING LOWER ANCHOR INSTALLATION
Follow the previous instructions in reverse order.
1. Reach under the bottom of the booster seat and depress the cam lock
lever while pulling the seat away from the vehicle seat back until the lower
anchor straps are extended all the way.
2. Disconnect LATCH connectors from vehicle anchors.
3. Pull lower anchor adjuster straps to recess the LATCH connectors into
the back of the booster seat bottom for safe storage.
1
IMPORTANT:
seat belt.
ADJUSTING THE HEAD SUPPORT
2
The head support height can be adjusted for best fit
to your child and to ensure proper placement of the
Vehicle Shoulder Belt. Squeeze the head support
adjustment lever on the back of the booster seat while
adjusting its height up or down to fit the child.
3
LOWER ANCHOR REMOVAL & HEAD SUPPORT
Do not use LATCH if installation interferes with vehicle
www.diono.com
15