Care And Maintenance - Bushnell 26-0224W Manual Del Usuario

Visibility decreases or disappears.
Bright light sources such as headlights may cause visibility to degrade or disappear completely. Turn
the Power OFF (2) and turn the scope away from the light source. The unit will restore itself in 1 or 2
minutes. Conditions such as fog or extremely dark environments will decrease visibility.
Scope flashes.
The scope may flash when used in a bright environment. It may also flash during the first few seconds
of use in dark environments.

CARE AND mAINTENANCE

Your Bushnell Night Vision device was designed to provide many years of reliable service. To ensure
that you get the most enjoyment out of your Night Vision device, always obey the following warning
and precautions:
• Do not point this device toward any light source greater than lux such as car headlights,
for an extended period of time. This device utilizes an internal flash protection system, which
minimizes potential damage, but long-term exposure to bright lights can damage the unit. Any
such damage may void your warranty.
• This device was designed to be self-contained. Do not open the body of the device or otherwise
attempt to service this device.
• Always store the device in a dry, well-ventilated room.
• Remove the battery if the device is to be stored for longer than 2 months.
• Keep the device away from any heating and air conditioning vents or other heating devices,
8