Luminance Brands Kathy Ireland Home SWEEP ECO CF275BS00 El Manual Del Propietario página 13

5. How to Wire Your Ceiling Fan
5.2
Securely connect the Fan Motor White Wire to the
Supply White (neutral) Wire using Wire Connector
(supplied) (Figure 18) .
5.3
Securely connect the Fan Motor Black Wire to the
Supply Black (HOT) Wire using Wire Connector
(supplied) (Figure 19) .
5.4
After connections have been made, turn Wires upward
and carefully push Wires into the Outlet Box, with the
White and Green Wires on one side of the Outlet Box
and position the Black Wires on the other side of the
Outlet Box (Figure 20) .
WARNING
!
Check to see that all connections are tight, including
ground, and that no bare wire is visible at the wire
connectors, except for the ground wire. Do not
operate fan until blades are in place. Noise and fan
damage could result.
Figure 18
Figure 19
GREEN
WIRES
WHITE WIRES
Figure 20
13
(Continued)
SUPPLY WHITE
(NEUTRAL)
LISTED WIRE
CONNECTOR
FAN MOTOR
WHITE WIRE
SUPPLY
BLACK
(HOT)
LISTED WIRE
CONNECTOR
FAN MOTOR
BLACK WIRE
BLACK WIRES
luminancebrands.com
Please contact 1-800-777-4440 for further assistance
ETL Model No.: CF275