Start Upinstructions - Garland 105 E Manual De Instrucciones

English

6. START UPINSTRUCTIONS

6.1. LIST OF MATERIALS
This machine includes the following elements which
you will find in the box:
• Shredder.
• Base.
• Wheels (2).
• Washers (4).
• Wheel covers (2).
• Wheel nuts (2).
• Main axis.
• Wheel axis (2).
• Instruction manual.
6.2. MOUNTING
1. Rest the machine on the hopper. Turn the holders a
and b as shown in the diagram.
A
2. Mount the wheels onto the main axis as per the
diagram:
a) Place the wheel axis inside the wheel.
b) Insert the washer on the main axis.
c) Insert the wheel into the interior axis.
d) Insert the nut.
e) Thread the nut and tighten it.
f) Place the wheel covers.
3. Turn the shredder back around and place on its base.
4. Press the anchoring switch to insert the catcher.
Anchoring switch
6.3. CHECKING POINTS PRIOR TO USE
that on the rating label of the machine.
B
Check the machine and look for loose pieces (nuts,
screws etc) and for damaged parts. Tighten, repair
or replace the pieces that you have found to be in
a bad state. Do not use the machine if damaged or
incorrectly adjusted.
28/112
Axis Wheel
The supply current must be in accordance to
Nut
Wheel cover
Washer