Switching The Alarm Function On/Off; Waking Up - ADE WS 1911 Instrucciones De Operación

8. Press .
"05" (= default setting 5 minutes) and "Z
display.
9. Use the
the snooze function (time span between two alarms). If
you select "OFF", the snooze function is switched off.
10. Press .
11. Proceed as described to make the same settings for
ALARM2. If you do not want to set a second alarm time,
simply press
shown again.

Switching the alarm function on/off

− Slide the ALARM1 or ALARM2 switch or both on the
back of the device to ON.
The display shows "M-F" or "S-S" or "M-F" and "S-S"
accordingly.
The alarm function is activated.
To deactivate an alarm function, slide the
respective switch to OFF.

Waking up

At the set time, you will be woken by an alarm signal, which
will become more intense as the waking time increases.
WS 1911 weather station
or button to set the desired time span for
repeatedly until the normal display is
" flash on the
z
79