Saved Weather Data; Frost Alert; Alarm; Setting The Alarm Time - ADE WS 2136-1 Instrucciones De Operación

Saved weather data

Using the MEM button, you will get the highest and lowest
temperature and humidity values for the last 24 hours
displayed.
‚ Press 1x: MAX values are displayed
‚ Press 2x: MIN values are displayed
‚ Press 3x: normal display indicator
In order to delete the saved values:
− Press and hold the MEM button for approx. 2 seconds
until the displayed values are deleted.

Frost alert

If the frost symbol
measured outdoor temperature lies in the range from -1°C
to 3°C (30°F to 37°F).
Even if the frost symbol is not being displayed, there
is essentially always a risk of frost at temperatures
around the freezing point.

Alarm

Setting the alarm time

1. Press SET once briefly.
The display will show a time and "AL".
2. Press and hold down SET for a few seconds until the
alarm hour indicator flashes.
56
is shown on the display, the
Weather Station with Wireless Outdoor Sensor WS 2136-x