Using Shoulder Belt Guide; Entanglement With Vehicle Seat Belt - Harmony Youth Booster Manual De Instrucciones

!
Any straps holding the restraint to the vehicle should
be tight, any straps restraining the child should be
adjusted to the child's body, and the straps should not
be twisted.
! THE VEHICLE'S SHOULDER BELT MUST LIE ACROSS
THE CHILD'S SHOULDER AND LAY ACROSS THE CHEST
– NOT THE FACE OR NECK. If the belt does not lie
properly across the child's shoulder and chest, the RED
shoulder belt guide clip ("Parts list - C") MUST be used
to ensure proper placement (see "Using shoulder belt
guide").

USING SHOULDER BELT GUIDE

1. Slide the vehicle's shoulder belt into the RED shoulder
belt guide ensuring it is flat. Position the belt guide
just above the child's shoulder ❶.
! THE VEHICLE'S SHOULDER BELT MUST LIE ACROSS
THE CHILD'S SHOULDER.
! All straps MUST be tight and NOT twisted. ALL slack
MUST be removed from lap and shoulder portions of
the 3-point vehicle belt to ensure a snug fit.
❶

ENTANGLEMENT WITH VEHICLE SEAT BELT

! WARNING: To avoid possible entanglement and
choking with your vehicle's shoulder belts, Harmony
Juvenile Products recommends that the following
precautions are taken when installing your booster
seat:
19
Shoulder
Belt
Belt
Guide