Tabla De Contenido; Specifications - Makita EM408MP Manual De Instrucciones Originales

ENGLISH (Original instructions)
TABLE OF CONTENTS
SPECIFICATIONS ............................................ 2
SAFETY WARNINGS ....................................... 3
PARTS DESCRIPTION ..................................... 7
ASSEMBLY ....................................................... 8

SPECIFICATIONS

Model:
Dimensions: length x width x height (without cutting tool) 880 mm x 320 mm x 196 mm
Nylon cord diameter
Applicable cutting tool
and cutting diameter
Gear ratio
Net weight
• Due to our continuing program of research and development, the specifications herein are sub-
ject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2014
Approved power unit
This attachment is approved to use only with the
following power unit(s):
• DUX18 Cordless multi function power head
• XUX02 Cordless multi function power head
• EX2650LH Multi function power head
WARNING:
Never use the attachment
with non-approved power unit. Non-
approved combination may cause serious
injury.
2-tooth blade
(P/N 197997-3)
3-tooth blade
(P/N 195298-3)
4-tooth blade
(P/N B-14118)
8-tooth blade
(P/N B-14130)
Nylon cutting head
(P/N 191D89-4)
OPERATION ................................................... 12
MAINTENANCE .............................................. 13
TROUBLESHOOTING .................................... 17
EM408MP
(34-3/4" x 12-5/8" x 7-3/4")
2.0 mm (0.08")
230 mm
(9")
230 mm
(9")
230 mm
(9")
230 mm
(9")
300 mm
(11-3/4")
1.4 kg
(3.1 lbs)
Symbols
The following symbols are used on the attach-
ment and this instruction manual. Understand
these definitions.
Take Particular care and
attention!
Read instruction manual.
Wear protective helmet, eye and
ear protection!
Wear eye and ear protection.
2 ENGLISH
EM409MP
880 mm x 185 mm x 203 mm
(34-3/4" x 7-1/4" x 8")
-
-
-
-
330 mm
(13")
14:19
1.2 kg
(2.7 lbs)