Parts Description - Makita EM408MP Manual De Instrucciones Originales

Maintenance
1. Have your machine serviced by our
authorized service center using only
identical replacement parts. Use only
identical spare parts and accessories
supplied by MAKITA. Incorrect repair and
poor maintenance can shorten the life of the
machine and increase the risk of accidents.
Never alter or remove any components
2.
of the machine. It may cause fire and/or
serious injury.
3. After use, clean the machine and check
all screws and nuts for tightness.
4. Check the condition of the cutting tool,
cutting tool guard and shoulder harness.
The cutting blade must be sharp. Never
straighten or weld damaged cutting
tools.
Storage
1. Before storing the machine, perform full
cleaning and maintenance. Remove the
battery cartridge. Empty the fuel tank.
Attach the cover to the cutting blade.
Store the machine in a dry and high or
2.
locked location out of reach of children.
3. Do not prop the machine against some-
thing, such as a wall. Otherwise it may fall
suddenly and cause an injury.
Other instructions
1. Pay attention to the environment. Avoid
unnecessary throttle operation for less
pollution and noise emissions. Adjust
the carburetor correctly.
Do not operate the engine with faulty
2.
exhaust muffler.
First Aid
1. In case of accident make sure that a first-
aid box is available in the vicinity of the
cutting operations. Immediately replace
any item taken from the first aid box.
2. When asking for help, give the following
information:
Place of accident
—
— What happened
Number of injured persons
—
— Kind of injuries
Your name
—
Additional safety instructions
1. To avoid accident, leave more than 15m
(50 ft) distance between operators when
two or more operators work in one area.
Also, arrange a person to observe the
distance between operators. If someone
or an animal enter the working area,
immediately stop the operation.
Only use the cutting tools that are
2.
marked with a speed equal or higher
than the speed marked on the tool.
3. Be sure to remove the cover on the cut-
ting blade before operation.
WARNING:
ate dust containing chemicals which may
cause respiratory or other illnesses. Some
examples of these chemicals are com-
pounds found in pesticides, insecticides,
fertilizers and herbicides.
Your risk from these exposures varies,
depending on how often you do this type
of work. To reduce your exposure to these
chemicals: work in a well ventilated area,
and work with approved safety equipment,
such as those dust masks that are specially
designed to filter out microscopic particles.
SAVE THESE INSTRUCTIONS.

PARTS DESCRIPTION

EM408MP
► 1. Cap 2. Pipe 3. Protector (universal type)
4. Protector extension 5. Cutter
7 ENGLISH
Use of this product can cre-
2
3
4
5
1