Publicidad
1.1 Select TV Screws
Hand thread screws into the threaded inserts on the back of your TV
to determine which screw diameter
CAUTION:
Verify adequate thread engagement of the screw/
spacer combination on your TV.
Too short will not hold the TV and too long will damage the TV.
Too Short
6
(M4, M6, or
M8) to use.
M8
M4 M6
Correct
Too Long
1.2 Spacers
a
: If your TV has a fl at back AND you want your TV closer to the wall,
use the shorter screws.
b
: Spacers and longer screws are supplied to accommodate:
● Round (irregular) back TVs
● TVs with inset mounting holes
● Extra space needed for cables
a
b
FLAT BACK
ROUND BACK
Standard confi gurations are shown. For special applications, or if you are
uncertain about your hardware selection, contact Customer Service at
.
1-800-359-5520
INSET HOLES
CABLES
Publicidad
