Página 1
THANK YOU FOR CHOOSING SANUS THE #1 TV MOUNT BRAND IN THE US. VSF409 Instruction Manual Scan for easy install video...
Página 2
TWO SIMPLE STEPS TO FINDING YOUR STUDS: Holding it vertically, lightly move the SANUS Pull apart the SANUS Magnetic Stud Finder to Step 1 Step 2 Magnetic Stud Finder up and down while expose the probing pin within.
VSF409 We’ll Make It Stress-Free If you have any questions along the way, just give us a call. 1-800-359-5520 (UK: 0800-056-2853) We’re ready to help! Lo haremos sin estrés Si tiene preguntas mientras realiza la instalación, llámenos. 1-800-359-5520 (Reino Unido: 0800-056-2853) Estamos listos para ayudarlo.
Página 4
Before getting started, let’s make sure this mount is perfect for you! Does your TV weigh No — Perfect! more than 50 lb 50 lb Yes — This mount is NOT compatible. MountFinder.Sanus.com or call (22.7 kg) including (22.7 kg) 1-800-359-5520 (UK: 0800-056-2853) to fi nd a compatible mount. accessories?
Página 5
STEP 1 Attach Bracket to TV Parts and Hardware for STEP 1 WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer;...
Página 6
1-2 Spacers 1-1 Select TV Screws Hand thread screws into the threaded inserts on the back of your TV : If your TV has a fl at back AND you want your TV closer to the wall, to determine which screw diameter (M4, M6, or M8) to use.
Página 7
1-3 Measure Your TV Hole Pattern Measure the width and height of your TV hole pattern in mm. 200 mm [7.87 in.] Record your measurements: Width _________ mm x Height ________ mm 200 mm [7.87 in.] 200 mm [7.87 in.] 100 mm [4 in.] 75 mm...
Página 8
1-4 Attach TV Bracket with Extensions (200 x 200 mm ONLY) M4/M6/M8 Flat Back 02 04 05 07 08 10 11 M4 Round Back / Extra Space M6/M8 Round Back / Extra Space 06 09...
Página 9
1-4 Remove Extensions - 200 x 100 mm, 100 x 100 mm, and 75 mm x 75 mm If mounting to a TV with a 200 x 100 mm (7 ⅞ x 4 in.), a 100 x 100 mm (4 x 4 in.), or a 75 x 75 mm (3 x 3 in.) hole pattern, remove the extension plates from the TV bracket using a screwdriver and wrench.
Página 10
1-4 Attach TV Bracket 200 mm x 100 mm M4/M6/M8 Flat Back 02 04 05 07 08 10 11 M4 Round Back / Extra Space M6/M8 Round Back / Extra Space 06 09...
Página 11
1-4 Attach TV Bracket 100 mm x 100 mm M4/M6 Flat back 02 04 05 10 11 M4/M6 Round Back / Extra Space 03 06 12 13 10 11...
Página 12
1-4 Attach TV Bracket 75 mm x 75 mm NOTE: If the hole pattern on your TV is 75 x 75 mm, washers M4 Flat back will not be used. Only M4 screws can be used. M4 Round Back / Extra Space...
Página 13
fi elds may aff ect the operation of those devices, resulting in serious injury or death. If you have an implanted medical device, keep at least 13 cm (5 in.) between your device and the magnet. Please consult with your physician or medical professional prior to using this product. Sanus Magnetic Stud Finder* NOTE: Not all hardware included will be used.
Página 14
(1 1/2 in.) nominal 38 x 89 mm (1½ x 3½ in.) ● Stud center must be verified Locate a nail/screw in the stud using the Sanus magnetic stud fi nder* provided. Find the edges of the stud using the probe of the stud fi...
Página 15
Level the wall plate template and tape in place. NOTE: For assistance in determining wall plate location, see HeightFinder at sanus.com. IMPORTANT : Be sure you mark and drill into the center of the stud.
Página 16
Level the wall plate template and mark the hole locations. NOTE: For assistance in determining wall plate location, see Height Finder at sanus.com. Drill two pilot holes using a 10 mm (3/8 in.) diameter drill bit.
Página 17
Remove the wall plate template . Tighten lag bolts only until the washers are pulled fi rmly against the wall plate CAUTION: Improper use could reduce the holding power of the lag bolt. To avoid potential injuries or property damage Do not over- tighten the lag bolts Fit lag bolt covers over lag bolts...
Página 18
STEP 3 Hang TV Mount to Arm Parts and Hardware for STEP 3 WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer;...
Página 19
STEP 3 Hang TV Mount to Arm Fit nut and cover into underside of mount arm Place washer and pivot pin onto mount arm Fit the bracket onto pivot pin . Slide washers and spacer onto mounting bolt and fi t bolt through mounting bracket and pivot pin until it meets nut...
Página 20
Adjustments A. Use hex key to adjust arm extension tension. B. Adjust rotation/level tension.
Página 21
Manage Cables Parts and Hardware for Manage Cables WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer;...
Página 22
Manage Cables Option A: Thread cable through the channel the secure with plate and plate screws Option B: Install the plate with plate screws . Thread cable ties through end holes in the plate . Arrange cables, then secure them with the cable ties NOTE: Pull the arm to its full extension before routing the cables through the channel, then loosely route the cables.
Página 23
Dimensions 200 mm (7.87 in.) 100 mm (3.94 in.) 75 mm (2.95 in.) 360° 237.0 mm 200 mm 100 mm 75 mm (9.33 in.) 7.87 in.) (3.94 in.) (2.95 in.) 133.4 mm (5.25 in.) 225.4 mm (8.87 in.) 300.5 mm ±15°...
22,7 kg No — ¡Perfecto! 22,7 kg (50 lb), incluidos Sí — Este soporte NO es compatible. Visite MountFinder.Sanus.com o llame al (50 lb) los accesorios? 1-800-359-5520 (Reino Unido: 0800-056-2853) para encontrar un soporte compatible. ¿De qué está...
ESPAÑOL PASO 1 Coloque el soporte en el televisor Ver PÁGINA 5 Piezas y elementos de sujeción para el PASO 1 ADVERTENCIA: Este producto contiene piezas pequeñas que podrían causar asfixia si fuesen tragadas. NOTA: No se utilizarán Antes de comenzar a montar la unidad, verifique que todas las piezas estén incluidas y en buen estado. todos los elementos de En caso de que falten piezas o alguna esté...
Nivele la plantilla de la placa de pared y péguela con cinta adhesiva en su posición. NOTA: Si necesita ayuda para determinar la posición de la placa de pared, consulte Height Finder en sanus.com. IMPORTANTE : Asegúrese de hacer las marcas y taladrar en el centro del montante.
Página 27
Nivele la plantilla de la placa de pared y marque la posición de los orificios. NOTA: Si necesita ayuda para determinar la posición de la placa de pared, consulte Height Finder en sanus.com.
ESPAÑOL Taladre los dos orificios guía utilizando una broca de 10 mm (3/8") de diámetro. IMPORTANTE : Los orificios guía deben taladrarse hasta una profundidad de 75 mm (3"). Nunca taladre sobre el cemento entre los bloques. Retire la plantilla de la placa de pared e inserte dos tacos PRECAUCIÓN: Asegúrese de que los tacos...
ESPAÑOL Utilice la llave hexagonal para apretar el perno de montaje y fije el soporte de montaje al brazo. Ajustes Ver PÁGINA 20 A: Utilice la llave hexagonal para ajustar la tensión de extensión del brazo. B: Ajuste la tensión del giro a la izquierda/derecha. Organización de cables Ver PÁGINA 21 Piezas y elementos de sujeción para el PASO 3...
Página 30
Milestone AV Technologies and its affi liated corporations and subsidiaries (collectively, “Milestone”), intend to make this manual accurate and complete. However, Milestone makes no claim that the information contained herein covers all details, conditions, or variations. Nor does it provide for every possible contingency in connection with the installation or use of this product. The information contained in this document is subject to change without notice or obligation of any kind.
Página 31
Learn ways to get the most out of your space. FACEBOOK.COM/SANUSSYSTEMS Find product updates and more. Learn installation tips, tricks and household know-hows. TWITTER.COM/SANUSSYSTEMS View step-by-step product videos to ease your install experiences. YOUTUBE.COM/SANUSSYSTEMS Find the latest news stories about your favorite SANUS products.
Página 32
If you ever have questions about your SANUS product, give us a call at 1-800-359-5520. We're ready to help! If you ever have questions about your SANUS product, give us a call at 1-800-359-5520. We're ready to help! ‘Monthly prize’...