Definitions: Safety Guidelines; Tool Specifications - DeWalt DCN692 Manual De Instrucciones

FIG. 1
F
I
H
A. Trigger H. Pusher latch
B. Trigger lock-off I. Bump/sequential
selector switch
C. Depth adjustment wheel
J. Rotating rafter/belt hook
D. Low battery & jam/stall
indicator lights K. On-board hex wrench
E. Stall release lever L. Battery Pack
F. Contact trip M. Dual speed switch
G. Magazine
E
A
D
J
NAIL SPECIFICATIONS
Nail Lengths
Shank Diameters
Nail Stick Angles
Shank Types
2
C
The definitions below describe the level of severity for
each signal word. Please read the manual and pay
attention to these symbols.
situation which, if not avoided, will result in death
or serious injury.
situation which, if not avoided, could result in death
G
or serious injury.
situation which, if not avoided, may result in minor
B
or moderate injury.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
property damage.
K
Firing Mode
L
Voltage
Height
Width
Length
Weight
Magazine Angle
Loading Capacity
M
Clipped Head
2"– 3-1/2" (50 mm – 90 mm)
.113"–.131" (2.8 mm – 3.3 mm)
30˚– 34˚
Smooth and Ring

Definitions: Safety Guidelines

DANGER: Indicates an imminently hazardous
WARNING: Indicates a potentially hazardous
CAUTION: Indicates a potentially hazardous

TOOL SPECIFICATIONS

Selective: Bump or Sequential
20
13.5" (346 mm)
4" (104 mm)
13.25" (335 mm)
8.0 lbs. (3.63 kg)
33˚
Up to 55 nails