smartheart 01-553 Manual De Instrucciones página 15

TAKING YOUR BLOOD PRESSURE READING
YOU CAN STOP THE INFLATION OR DEFLATION PROCESS AT ANY
TIME BY PRESSING THE POWER BUTTON.
As the inflation process begins, the display may
7.
briefly show a downward arrow
the cuff is releasing any air remaining in the cuff
prior to measurement inflation
8. The cuff will automatically inflate; you will see the
numbers increase on the display screen and feel
the cuff inflate.
9. When the measurement is complete, the cuff will
automatically deflate, then your blood pressure
measurement and pulse reading results will show
on the display screen at the same time, Fig 4.
10. The Hypertension Indicator will indicate your
reading range on the left display in comparison
to the color bars on the face of the monitor,
Fig 5. See page
interpreting the Hypertension Indicator results.
11. If an irregular heartbeat was detected during the
reading, the Irregular Heartbeat Detector indicator
will appear on the display, Fig 6. See page
for more information on the Irregular Heartbeat
Detector feature.
12. The reading will automatically be stored in
memory, up to 60 readings per user.
13. Select POWER to turn the unit off and conserve
energy and battery life.
14. The unit will automatically shut-off approximately
1 minute after use.
15. Disconnect the cuff and tubing prior to storage.
17 for information regarding
indicating
16
Fig. 4
Fig. 5
Fig. 6
ENGLISH • 15