Glass Panel Installation - OVE ARUBA Manual Del Usuario

1-2. Insert the fixed panel's bottom seal strip (N) and the side panel's bottom seal strip (L) at the base of the fixed
panel (C) and side panel (K). Cut the surplus part with a cutter.
3. Insert the fixed panel (C) and the side panel (K) into the wall tracks (B & B1). Do not fully tighten it as further
adjustments may be required.
Note: The wall track (B & B1) allows you to adjust the position of the fixed panel (C) and side panel (K).
Adjusting the depth and/or giving the side panel a slight angle allows for precise alignment with the door.
4-5 Smoothly slide the guide (Q) at the bottom of the fixed panel (C) and the side panel's clamp (V) at the bottom of
the side panel (K) both without securing.
6. Slide the 2 stoppers (E) and the support bar's anchor (D) onto the support bar (F).
1
C
N
3
&
B
B1
5
K

GLASS PANEL INSTALLATION

&
C K
V
10
2
K
4
C
Q
6
D
E
F
E
L