Zipper Application - Janome 509 Manual De Instrucciones

Janome Sewist 509 Instruction Manual
w
q
q
(A)
o
z
i
e r
q
x
!3
www.toews.com
e
r
w
(B)
u
y
w
t
!4
!2
!1
!0

Zipper Application

Machine setting
q Stitch pattern:
w Stitch length:
e Thread tension: 3 – 6
r Presser foot:
Attaching the zipper foot
A: To sew the left side of the zipper, attach zipper foot
with the right side pin.
B: To sew the right side of zipper, attach the zipper foot
with the left side pin.
q Groove
w Pin
Fabric preparation
z Add 3/8" (1 cm) to the zipper length. This is the
overall opening size.
q Right side of the fabric
w 3/8" (1 cm)
e Opening size
r Zipper length
t Slider
y Zipper teeth
u Zipper tape
i Wrong side of the fabric
o End of the opening
x Place the right (top) sides of the fabric together. Sew
a bottom seam 5/8" (2 cm) from the right edge to the
zipper bottom stop position. Sew a few stitches in
reverse to lock.
Increase the stitch length to "4", set needle thread
tension to "1", and baste the entire length of the
fabric.
!0 5/8" (2 cm)
!1 Basting
!2 Reverse stitch
!3 End of the opening
!4 Bottom seam
48
Sewist 509 Owners Manual/ User Guide
A
1.5 – 4
Zipper foot E