Unpacking And Setting Up The Unit; Evaporative Wick - Aircare 696 Serie Guía De Uso Y Cuidado

• Never add essential oils in the water. It can damage the plastic seals and cause
leaks.
ASSEMBLY

UNPACKING AND SETTING UP THE UNIT

1. Remove humidifier from carton.
2. Lift off the top grille. Remove water bottles and lift off the chassis/power pack.
3. Remove the evaporative wick and all of the remaining packaging materials
from the cabinet. Check to see that you have all of the following items
removed from the boxes, accessory kit, and cabinet before discarding the
packaging:
♦ Filler Hose
♦ Caster kit
♦ Bacterial treatment sample
CASTERS
4. With access to the bottom of the
cabinet, insert each caster stem
into a caster hole on each corner
of the humidifier bottom. The
casters should fit snugly and be
inserted until the stem shoulder
reaches the cabinet surface. Turn
the cabinet right side up.

♦ Evaporative Wick

♦ Two Water Bottles
♦ Float and support with two screws
♦ Manual
NOTE:
To ensure both bottles will empty properly, use
a bubble level to verify the humidifier cabinet is
placed on a level surface.
EVAPORATIVE WICK
5. Insert the 1041(CN) wick into the unit. The wick
has a mounting rib on the top edge which hooks
over a rib at the inside back of the cabinet. This
allows the wick to hang in the water channel
(see cutaway illustration for details). Hang wick
into cabinet as shown.
4