Greencut EB560L Manual De Instrucciones página 33

All information included in this manual is relevant to your own safety and that of your environment. If you have any
questions about the information included in this manual, consult a professional or contact the Official Technical Service.
The following information on hazards and precautions includes the most probable situations that may arise during the use
of this machine. Consult all the documentation, packaging and product labels before using it.
If you encounter a situation not described in this manual use common sense to use the machine as safely as possible and,
if you see danger, do not use the machine.
USERS
• This machine has been designed to be manipulated by users of legal age who have read and understood these
instructions. Do not allow people under age and people who do not understand these instructions to use the
machine.
• Familiarise yourself with this machine before using it. Make sure you know where all the controls are, the security
devices and how they should be used.
• If you are an inexperienced user, it is highly recommend that you practice doing simple jobs and, if possible, in
the company of an experienced person.
SPERSONAL SAFETY
• This blower is designed to blow leaves or light materials (plastics and papers ...) off the ground and group them
in one area. Do not use this machine for any purpose other than that for which it was designed.
• Do not force this machine. A correct use for the type of work to be done will allow you to work better and more
safely.
• Stay alert. Watch what you are doing and use common sense when operating this machine. Never use the
machine with defective protections or without safety devices.
• Do not modify the controls of this machine.
• Do not use this machine if any of its components is damaged.
• Do not use this machine if the switch does not change between "ON" and "OFF". Any electrical appliance that
can not be controlled with the switch is dangerous and must be repaired.
• Do not use this machine when you are tired or under the influence of drugs, alcohol or medications.
• If the machine vibrates abnormally, stop it, remove the battery and inspect the machine for the possible cause and
repair it. If you can not find the fault, contact the Official Technical Service.
• The machine must be placed horizontally on a stable and levelled surface, without a steep slope.
• Remove all keys or hand tools from the work area before starting this machine.
• Keep proper footing and balance at all times. Sliding or unstable surfaces can cause you to lose your balance and
the control of the machine.
• If you have to remove any material that has entered into the blower ducts, turn it off and remove the battery
before performing this operation.
• Never put your fingers or any other part of your body in or near the air inlet area of the blower tube of the
machine.
WORKWEAR
• Dress properly. Do not wear loose clothing or jewelry. Keep your hair and clothes away from moving parts. Loose
clothes, jewelry or long hair can be caught by moving parts. Use:
-
Eye and hearing protection.
-
Safety gloves.
-
Long trousers.
• The use of safety equipment such as a dust mask, safety gloves, anti-slip boots and helmet will reduce the risk
of personal injury.
33
EN