Philips Norelco S9721 Manual Del Usuario página 26

ENGLISH
28
C
C
3
1
2
C
C
5 Hold the shaver head side down above the
shaver holder.
6 Place the shaver into the holder (1), push
shaver back (2) and press down the top
cap to connect the shaver (3) (click).
The shaver will only fit in the SmartClean System
in one direction.
7 The battery symbol slowly blinks to
indicate shaver is charging.
8 Press the ON/OFF button on the
SmartClean System to start the cleaning
cycle. (click).
The cleaning symbol will blink.
◗ The cleaning cycle takes approximately 10
minutes. When completed, the cleaning
symbol will light up continuously and the
drying phase starts automatically.
◗ During the drying phase, the drying symbol
blinks.
◗ The drying phase takes approximately 4 hours.
When completed, the drying symbol will light
up continuously.
◗ Do not press the ON/OFF button while the
cleaning cycle is running. If this does occur, the
cleaning cycle will stop and the cleaning or
drying symbol goes off . The cleaning cycle can