VWR Visiscope 400 Serie Manual De Instrucciones página 8

Installing the fluorescence
• When using the epifluorescence, you can
mount the anti-glow cap on the bottom of
the condenser, in order to increase the
contrast of the image. (Fig.13)
• Unscrew the protection cover on the left
side of the microscope, with the provided
allen wrench. (Fig.14)
• Slide the green filter inside the dovetail
guide, after screwing the filter lever into
the threaded hole of the filter. Mount
the protection cover back in its position.
(Fig.15)
• On top of the filter lever, screw the terminal
with the etched G. Repeat the same steps
for the right side, mounting the Blue
filterset. (Fig.16)
• Connect the external power supply to the
input jack on the rear. (Fig.17)
8
Fig.13
Fig.14
Fig.15
Fig.16
Fig.17