VWR VisiScope 400 Serie Manual De Instrucciones página 13

MICROPHOTOGRAPHY
Installing the photography adapter
1. To activate the video port, pull the light
path selector lever to "In" position. (Fig.29)
2. Loosen the locking bolt ① on the trinocular
viewing tube, and take out the dust cap ②.
3. Install the photography adapter into the
trinocular port according to its instructions,
and screw down the locking bolt ①.
4. Attach the camera ring (if any) to the
adapter.
5. Attach the camera to the ring.
● Warning: for some cameras (mainly
reflex) the ring is not included with the
microscope, and it should be supplied by
the user.
● For the photography of dark specimens,
obscure the eyepieces and the viewfinder
with a dark cloth in order to reduce stray
light.
● The camera magnification
calculated as objective magnification ×
camera + lens magnification.
► When shooting with a SLR, the
mirror movement may cause camera
movement. Please lift the mirror,
use long exposure times and use an
extension cord. (Fig.30)
can be
13
Fig.29
Camera
Adapter
②
①
Fig.30