VWR VisiScope 400 Serie Manual De Instrucciones página 8

Connecting the power cord
1. Turn the main switch ① to "O"(off) before
connecting the power cord. (Fig.13)
2. Insert the cable into the power socket of
the microscope. (Fig.14)
3. Plug the power cord into the mains sock-
et. Check for a safe connection.
► Please use the supplied power cord.
If lost or damaged, please refer to
qualified service.
► Connect the power cord to a grounded
(earthed) power supply only.
Replacing the fuse
Before replacing the fuse, turn the main switch
to "O" (off) and unplug the power cord.
Rotate the fuse support out of the holder using
a straight screwdriver. Insert a new fuse in the
support, then rotate the support back into the
holder. (Fig.15)
► Fuse rating:
see back of the microscope.
8
①
Fig.13
Fig.14
Fig.15