CAPITAL SPORTS ERGO PRO Manual Del Usuario página 16

Step 2
• First, connect the Connective Wire (37) and Sensor Wire (20). Secondly, connect Connective Wire (20) and Tensi-
on Wire (21) together with Tension Controller (22) as the following picture, ensured the Wire has been connected
correctly.
• Then, fix Handlebar Post (2) into the Main Frame (1) with Screws (17) and Flat Washers (46). Next, fasten the Hand-
lebar Post (2) with the Main Frame (1) by the usage of Screws (18), Flat Washers (16) and Nylon Nuts (19).
16