Fein ABS18 Q Manual De Instrucciones página 20

OBJ_BUCH-0000000300-001.book Page 20 Tuesday, March 20, 2018 8:14 AM
en
20
Symbol, character Explanation
Weight according to EPTA-Procedure 01
Low speed
High speed
Reduce torque
Increase torque
* The power tool can additionally be operated with deviating performance data in the 12 V
and 14.4 V voltage classes.
(**) may contain numbers and letters
*** Partially in delivery scope
Character Unit of measurement,
international
U
V
f
Hz
-1
n
/min, min , rpm, r/min rpm
0
-1
n
/min, min
S
M... Nm
Ø mm
L
dB
pA
L dB
wA
L dB
pCpeak
K...
2
m/s
2
m/s
h,D
2
m/s
h,ID
2
m/s
h
m, s, kg, A, mm, V,
W, Hz, N, °C, dB,
2
min, m/s
For your safety.
Read all safety warnings and all
WARNING
instructions. Failure to follow the
warnings and instructions may result in electric shock,
fire and/or serious injury.
Save all warnings and instructions for future reference.
Do not use this power tool before you have thor-
oughly read and completely understood this
Instruction Manual and the enclosed "General
Safety Instructions" (document number
3 41 30 054 06 1). The documents mentioned should be
kept for later use and enclosed with the power tool,
should it be passed on or sold.
Please also observe the relevant national industrial safety
regulations.
Unit of measurement, Explanation
national
V DC voltage
Hz Frequency
No-load speed (with fully charged battery)
/min Impact rate
Nm Torque (hard/soft screwdriving application)
mm Diameter of a round part
dB Sound pressure level
dB Sound power level
dB Peak sound pressure level
Uncertainty
2
m/s Vibrational emission value according to EN 60745
(vector sum of three directions)
2
m/s Mean vibrational value for drilling in metal
2
m/s Mean vibrational value for impact drilling in
concrete
2
m/s Arithmetic mean value of the vibration total values
m, s, kg, A, mm, V, Basic and derived units of measurement from the
W, Hz, N, °C, dB, international system of units SI.
2
min, m/s
Intended use of the power tool:
ABS18 Q (**) / ASCM18 QSW (**):
Hand-held cordless drill/driver for screwing in and
unscrewing screws and nuts, and for drilling and screw-
driving in metal, wood, plastic, ceramics in weather-pro-
tected environments without water supply using the
application tools and accessories recommended by FEIN.
ASB18 Q (**):
Hand-held cordless hammer drill for screwing in and
unscrewing screws and nuts, and for drilling and screw-
driving in metal, wood, plastic, ceramics, and for impact
drilling in concrete, stone and bricks in weather-pro-
tected environments without water supply using the
application tools and accessories recommended by FEIN.