Waeco PerfectCharge MCP 1204 Instrucciones De Uso página 34

Technical description
6.2 Status indications
Designation
Red LED
Green LED
Blue LEDs
Meaning of the blue LEDs (mode 1 and 2)
1 2
U
14 V
4
3
2
1
Key to the figure:
LED status
34
Description
Flashing: The polarity is incorrect, or the battery voltage is
less than 9 V.
Constantly lit: The connection to the battery was discon-
nected during the charging process.
Constantly lit: Mode 1 or mode 3 is active.
Flashing: Mode 2 is active.
In mode 1 and mode 2, the LEDs indicate the phase in which
the battery charger is currently operating (see the following
table).
The LEDs flash in succession when the battery charger is
operating in wait mode (the mains voltage is connected but
the battery is not connected).
The LEDs flash simultaneously when the battery charger is
ready for use (mains voltage is connected, battery is con-
nected, button has not been pressed).
3 4
Mode 2
14,4 V
Mode 1
Meaning
Off
Flashing
Constant glow
PerfectCharge MCP1204/1207
5 6 7
14,7 V
13,8 V
8
14,4 V
12,8 V
t
EN